Common automatic screw machine failures have the following 4 common situations. In order to cope with these situations, automatic screw machine manufacturers have prepared the following solutions:

Slippage phenomenon of automatic screwing machine

There are two main factors that cause slippage problems: screwdriver bit and torque.

The screwdriver bit is a consumable product. It is often contacted with the screw, and it will wear out over time. The worn screwdriver bit needs to be replaced, otherwise it will cause slippage;

Excessive torque can also cause slippage. Check whether the electric screwdriver's torque is suitable for the current lock screw torque range, and retest the torque with a torque meter.

The automatic screwing machine appears screw lock floating height

Check whether the locking height in the step setting in the program reaches the actual locking position of the screw, and whether the locking speed parameter setting is correct.

The position of the lock screw is shifted in the automatic screwing machine

This is mainly for the coordinate automatic locking screw machine. Usually the coordinate automatic locking screw machine can be used for various products of different models. However, when the product is replaced, the corresponding locking scheme needs to be replaced, so it is necessary to check every time in the program. Whether the position of each coordinate point is accurate, select the coordinate correction function, and re-correct the coordinates.

The device crashes in the automatic screw machine

1. Check whether the program parameter settings are correct, and restart the device after confirmation;

2. Check whether the power supply is abnormal.