There are a total of 9 points for attention when using the air-blowing automatic locking screw machine, most of which are reflected in the screw conveying condition and the accuracy of the screw position:

After purchasing the air-blowing automatic locking screw machine, how to use it can better extend the service life and use it more smoothly. The automatic locking screw machine manufacturer will give you a solution to reduce the problems of the automatic locking screw machine and improve the automatic Work efficiency of soldering machine.

1. The screws used should have fewer defects such as foreign matter, mixing, flower heads, etc., otherwise the machine will not work smoothly.

2. The selected screws should be commonly used, a large number, and a few types to improve the use efficiency of the automatic screw machine.

3. The vibration force of the track cannot be adjusted too much, otherwise the screw will easily squeeze out of the track on the screw track, which will affect the stability of the automatic locking screw machine.

4. Keep the electric screwdriver lock nozzle sliding smoothly on the electric screwdriver sliding sleeve, otherwise the screw will not easily enter the electric screwdriver lock nozzle and affect the use of the automatic screw locking machine.

5. Be sure to wait for the electric screwdriver to reach the set torque, and then lift the electric screwdriver after it stops automatically.

6. The position of the lock screw should be as uniform as possible to avoid different depths, uneven surfaces, and narrow spaces.

7. Do not bend the screw conveying pipe, otherwise the screw will get stuck in the bending part during the screw conveying process.

8. If you find that the automatic lock screw machine does not send a screw to the electric screwdriver's lock mouth to be locked, you can repeat the click (press the screwdriver and the electric screwdriver rotates), let the machine send a screw to the electric screwdriver's lock mouth to be locked.

9. The air pressure cannot be adjusted too much, otherwise it will only speed up the wear rate of the nose and mouth of the electric batch, and the screw will sometimes directly rush out of the lock mouth.

Any machinery and equipment needs to be cleaned and maintained regularly, and the air-blowing automatic screw-locking machine also needs maintenance to be more durable and better to use. The blower type automatic locking screw machine manufacturer Chengke Electronics has solved the bottleneck encountered by customers in the production and manufacturing process, and improved work efficiency. It also hopes that the correct operation and maintenance will make the blown type automatic locking screw machine have a longer life for customers. service.